Description
Description ▼
Advantages of our strip door curtain:
Comfort
- Made of PVC, the transparent strip door curtain is very flexible, which allows animals, people and machinery to pass easily without letting air in.
- They quickly and easily separate two spaces by isolating them from noise but also from dust.
- Thanks to this system, drafts and temperature variations are avoided while allowing easy movement of people.
- Very practical and economical, this curtain of strips brings a real gain in terms of identifying work and security spaces.
- Finally, it is very resistant to shocks and repeated stresses.
Installation
- Stainless steel profile
Length = 1m
Number of hooks = 24
ø anchor holes = 6.2 mm - Fixing plate
Height = 45mm
Hole spacing = 82 mm
ø holes = 5 mm
For the plate of 200, you need 3 fixing holes
300 Plate = 4 fixing holes
400 Plate = 5 fixing holes
Further information
- The strap supports are delivered without screws
- Available in several sizes
- Roll length: 25 m or 50 m
Why use
door straps?
In PVC, the strip door curtain with transparent strips allows constant access to your buildings for animals while isolating it from the cold, drafts and insects.
It is often used for door frames that have direct access to the outside, but can be used to create separate spaces inside your structure.
Characteristics ▼
Technical characteristics
- Transparent PVC strap
- Attaches to stainless steel profile on fixing plate
- Stainless steel profile:
- Length: 1m
- 24 hooks
- Anchor hole diameter: 6.2 mm
- Fixing plate:
- Height: 45mm
- Hole spacing: 82 mm
- Diameter holes: 5 mm
- 200 Plate : 3 fixing holes
Dimensions
- Dimensions : from 200 mm to 1 000 mm
See detail below
Dimensions
Reference | Dimensions |
LAN200 (strap 200) | 200 x 2 mm |
LAN300 (strap 300) | 300 x 3 mm |
LAN400 (strap 400) | 400 x 2 mm |
LANPROFILMUR (wall profile) | 1000 mm |
LANPLAQUE200 (Fixing plate) | 200 mm |
LANPLAQUE300 (Fixing plate) | 300 mm |
LANPLAQUE400 (Fixing plate) | 400 mm |
Downloads ▼
Non-contractual photos – Dimensions and weights are given as an indication – Tolerance +/- 5%.